For many users, the reason for starting the Mesh Wi-Fi network system is just to hope to get a new Internet experience with full coverage of home or office Wi-Fi. For example, the NETGEAR Orbi series provides a very intimate app interface, which can be quickly set up according to the instructions.

Change the Wi-Fi name (SSID)

There may be too many Wi-Fi signals around, so you can get a uniquely identifiable Wi-Fi name for your home or office Wi-Fi network. The proper noun is also called “SSID”. You don’t have to look for a long list on the connection list, Orbi users. Can do this:

1. Start a web browser and type http://www.orbilogin.com or 192.168.1.1 in the address bar. (Reminder: Your device must be connected to the Orbi router via an Ethernet router or wireless network to access this page.)
2. When prompted, enter the username and password for the Orbi router.
3. The default user name is admin; the default user password is password.
4. Under the BASIC tab, click on the Wireless option.
5. In the Name (SSID) field, enter your preferred wireless network name, then click Apply to save the change.

Use WPS password-free seconds to connect to Wi-Fi

Generally, the Wi-Fi router has the WPS quick connection function, and the physical button is also formed on the body so that the user can connect to the Wi-Fi network safely and quickly without needing to remember the Wi-Fi name and password.

Many users see Orbi’s simple body design, thinking that there is no WPS button, but the Sync button behind it is also the WPS button, so you can also press the Sync button to start the WPS function of the phone or computer. When a friend visits, they can simply pair online.

Check the satellite connection status

Mesh Wi-Fi’s network signal can be wirelessly multiplied by satellite extensions, and the placement is closely related to the extension effect. Orbi has an LED indicator on the top of the fuselage. Users can check the connection between the host and the host by observing the color and flashing of the light.

According to NETGEAR’s original recommendations, users can place the Orbi satellite router in the center of the overall space, and observe the top light number is divided into the following tips:

1. The white light continues and the Orbi satellite router is starting up.
2. A flashing red light flashes red when the Orbi satellite router first starts up, indicating that an attempt is made to establish a connection with the Orbi network system.
3. A steady red light, if the Orbi satellite router lights up red for more than ten seconds, it means that the IP location assignment cannot be obtained from the Orbi router.
4. Continuous blue light, if the Orbi satellite router lights up blue for more than ten seconds, the connection signal between the Orbi satellite router and the Orbi network system is good.
5. The orange light continues, and if the Orbi satellite router lights up for more than ten seconds, it means that the connection signal between the Orbi satellite router and the Orbi network system is normal.

To put it simply, when the Orbi satellite router is set for the first time, it will continue to show red light, it may not be able to establish a connection with the Orbi host, or if a setting error occurs, or if you see an orange light, you can adjust the Orbi satellite extension first. Position, try to re-pair the Orbi host by pressing the SYNC button on the back of the unit. For more information Orbi Setup you can visit Setup Netgear Orbi.